Achemetal Tungsten & Molybdenum Co., Ltd Achemetal Tungsten & Molybdenum Co., Ltd

Home Tel：+8613526941255 Stock Code:870809 中 / EN

Achemetal Tungsten & Molybdenum Co., Ltd

Application
Win by quality · Customer driven · Reasonable and honest · Common development

Stirring Bar for Smelting

(Summary description)The stirring bar can eliminate glass bubbles when stirring glass solutions, to obtain molten glass with uniform temperature, thus ensuring the quality and finished product rate of finished products. Glass stirring bars are widely applied to the industries of optical glass, electronic glass, vessel glass and toy decoration glass.

Stirring Bar for Smelting

(Summary description)The stirring bar can eliminate glass bubbles when stirring glass solutions, to obtain molten glass with uniform temperature, thus ensuring the quality and finished product rate of finished products. Glass stirring bars are widely applied to the industries of optical glass, electronic glass, vessel glass and toy decoration glass.

Information

Stirring Bar for SmeltingBusiness Consulting：+86-13526941255 Yanyan

Email：yanyan@achemetal.net

Tungsten-molybdenum Glass Stirring Bar

The stirring bar can eliminate glass bubbles when stirring glass solutions, to obtain molten glass with uniform temperature, thus ensuring the quality and finished product rate of finished products. Glass stirring bars are widely applied to the industries of optical glass, electronic glass, vessel glass and toy decoration glass.

With extremely strong high-temperature strength as well as difficult erosion from most of molten glass, tungsten-molybdenum materials are the optimal materials for manufacturing glass stirring bars.

Previous: Spinning Nozzles
Next: Material for Die-casting Mold
Previous: Spinning Nozzles
Next: Material for Die-casting Mold
Heater 2017-11-21 00:00:00
With extremely low saturated vapor pressure, low thermal expansion coefficient and extremely good high-temperature strength, tungsten and molybdenum materials are the best choice for high-temperature in-furnace heating elements.
More>
Shielding 2017-11-21 00:00:00
Tungsten-molybdenum materials are suitable to be used for shielding at the temperature of 1,300℃ to 2,800℃, which reserve the heat in an effective interval in the modes of heat reflection and convection obstruction.
More>
Hot Isostatic Pressing Cylinder 2017-11-21 00:00:00
Heat screens applied in hot isostatic presses are called hot isostatic pressing cylinders. Hot isostatic pressing cylinders have higher requirements than common heat screens when working under the conditions of 2000℃ and 2000MPa. To ensure the air tightness, Achemetal has adopted a thermal spraying process based on welding.
More>
Crucible 2017-11-21 00:00:00
Tungsten powder or molybdenum powder is directly subjected to sintering molding or hot isostatic pressing molding, and is mostly used for manufacturing large crucibles of sintering furnaces, crystal growth furnaces, glass smelting and rear earth smelting equipment. Particularly, these kinds of crucibles are used in furnaces of growing sapphire crystals by KY method, EFG method and heat exchange method in large quantity. Usually, the wall thickness is 8-15mm; the diameter is 100-600mm; the height is 50-700mm. The purity of these kinds of crucibles: W≥99.95%; the density usually can reach 18.2g/cm3; and the density can reach more than 18.8g/cm3 by a hot isostatic pressing technology as required specially. The density of molybdenum crucibles usually can reach about 10.0g/cm³.
More>
Loaded Boat 2017-11-21 00:00:00
In sintering furnaces or thermal treatment furnaces, tungsten or molybdenum materials are required to be prepared into containers when the processed materials are powder or granules. Loaded boats can be designed in different shapes according to different shapes and ventilation conditions of the processed materials. Achemetal can provide boat vessels made of pure tungsten, pure molybdenum as well as tungsten alloy and molybdenum alloy according different requirements on the operating temperature and strength as well as purity. Tungsten-molybdenum loaded boats manufactured by Achemetal feature good high-temperature deformation resistance and high dimensional accuracy.  
More>
Rack 2017-11-21 00:00:00
Racks are used for placing and transferring workpieces needing to be processed in high-temperature annealing furnaces and sintering furnaces, and have extremely high requirements on the high-temperature strength of materials for manufacturing racks. Achemetal can manufacture pure tungsten, pure molybdenum, molybdenum-lanthanum alloy and titanium-zirconium-molybdenum alloy racks, to enhance creep resistance and high-temperature strength of materials. 
More>
Fastener 2017-11-21 00:00:00
Achemetal can provide you with tungsten or molybdenum screws or nuts of British system or metric system.
More>
Tungsten-molybdenum Material for Monocrystalline Silicon Furnace 2017-11-21 00:00:00
With high-temperature resistance and low volatility, tungsten-molybdenum materials are widely applied to monocrystalline silicon furnaces and polycrystalline silicon furnaces.
More>
Previous page
1
2
…
5