Molybdenum Target
Molybdenum targets produced by Achemetal Tungsten & Molybdenum Co., Ltd. include molybdenum plane targets (molybdenum round targets and molybdenum strip-type targets) and molybdenum rotating targets.
Molybdenum plane targets are formed by processing high-quality plates of our company, and feature high density, no crack and sand hole inside, bright surfaces, uniform color and luster as well as accurate dimensions.
Small molybdenum rotary pressing targets are processed by high-quality bars, and feature accurate dimensions, smooth surface, high purity, etc.
Molybdenum rotating targets of the conventional size are produced by a hot isostatic pressing process, and feature high density (10.15 g/cm³), fine grains and good molding.
Conventional density: 10g/cm³~10.15g/cm³;
Special process density: more than 10.15g/cm³.
The molybdenum rotating targets have the following parameters |
||||
Element |
Mo |
|||
Purity |
≥99.95%(3N5) |
|||
Typical sample dimension |
φ153mm×φ123mm×1114mm |
|||
Density |
10.15g/cm3 |
|||
Hardness |
HV5:246-253 |
|||
Grain Size |
35μm |
|||
Appearance |
Ra≤0.4μm |
|||
Impurity Content |
Pb |
≤5ppm |
C |
≤20ppm |
Cd |
≤5ppm |
Sb |
≤10ppm |
|
Si |
≤10ppm |
Ni |
≤30ppm |
|
Cu |
≤10ppm |
P |
≤5ppm |
|
Mg |
≤10ppm |
N |
≤50ppm |
|
Bi |
≤5ppm |
|||
Al |
≤15ppm |
|||
Ca |
≤15ppm |
|||
N |
≤ppm |
Note: all the specifications can meet the requirements of customers on high accuracy through machining.
The molybdenum targets of our company are mainly applied to:
▲Thin-film solar industry, touch control industry, semiconductor industry, optical coating industry